العدد والأدوات

بروتو - حبة مغناطيسية مقاس 5/8 بوصة

بروتو - حبة سداسية - برأس مربع مقاس #2

أداة احتراق الأنابيب Proto®

دبابيس ستانلي ، دبابيس شديدة التحمل - نوع G ، 14 مم - 1000 قطعة

بيج ريد - رافعة هيدروليكية بعجلات 2000 كج

• High quality integrated cast cylinder

• Oil cylinder is equipped with permanent flow valve to ensure steady descend for the goods because of over loading.

• High-balanced intensifying frame

• Economical,superior cost performance

• High strength “C” type fork

• High strenght welding hydraulic,preeure oil cylinder,equipped with safety valve

بروتو - حلقة ربط مفتاح 1 بوصة مقاس 2-3/4 بوصة محفورة

ساحب التروس Proto® 2 Jaw ، 7 بوصة

A Lightweight Leisure Generator
The Black & Decker 1000i inverter generator (BD 1000i) is a perfect machine to power your leisure activities. With a maximum output of 900 watts, you can use this handy unit to power up the lights and sounds outside your home when you’re hosting a party or entertaining visitors. With a 2 litre fuel capacity, the 1000i can run continuously for a little over 2 hours on a single tank of fuel which is just long enough to illuminate your garden in the evening or power a radio while you’re hosting. Because the machine is small and compact, you can easily carry it by yourself to the location of your choice and store it when it’s not in use. If you want a compact petrol generator to power your light leisure activities, the Black & Decker 1000i is a fantastic choice.

Black & Decker BD 1000i: Tech Specs
Voltage: 230 V
Peak Power: 900 W
Rated Power: 850 W
Rated Current: 3.6 A
Wiring Type: Copper
Engine Type: 2-Stroke Reed Valve, Forced Air Cooled
Engine Model: YK1E45F
Bore X Stroke: 45*40
Displacement: 63 cc
Output: 2 HP / 3600 rpm
Continuous Work: 2.2 Hours
Fuel Tank Capacity: 2 L

Equipment:
Start System: Hand Recoil Start
Voltage Regulator: IVR

The lightweight Black & Decker 1000i generator is ideal for light leisure use. With maximum power output of 900 watts and the ability to run for two hours on a single tank of fuel, the BD 1000i is an excellent machine to power small electronic devices during outdoor use.

بيج ريد - عفريته هيدروليكية 3 طن

Black & Decker KD750KC Pneumatic Hammer Drill with 2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite. It has 750W Powerful unit for serious drilling. Its Variable speed offers more control and versatility. Its come up with second hand at front side for additional control. Remember, this unit will not work in the USA because it runs on 220/240 Voltage. That means you can only use it overseas. It cannot be used in the USA. It is designed to run on Foreign 220/240 Voltage. It makes a great gift for any handyman (or handy-woman) overseas.

2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite
750W power - Powerful unit for serious drilling
Powerful Pneumatic Hammer 0-5200 impacts Per minute.
High performance, non slip SDS-Plus chuck for quick accessory changing
Variable speed offers more control and versatility
Depth guide to assist the user when a predetermined depth is needed.
Secondary handle to provide additional control
Specifications:

Power - 750 W
Power supply - 220 Volt
Voltage - 230 V
Hammer - Yes
Max. capacity(wood) - 30 mm
Max. capacity(steel) - 13 mm
Max capacity(concrete) - 26 mm
Reverse - Yes
Speed - Variable
No load speed - 0-1050 rpm
Cable length - 3 m
Adjustable depth stop - Yes
Adjustable second handle - Yes
Lock-on switch - Yes
Maximum efficiency in concrete thanks to its 2.7 joules
Drilling in concrete and other materials through the chuck adapter
3 functions for the perforation, the simple drilling and chiseling
Strike rate very elevated over 6000 rounds per minute for fast work
Variable speed available
Adjustable depth stop
Designed for fast, efficient penetration of brick, block, stone and concrete
Adjustable second handle
Maximum capacity - wood 30 mm
Maximum capacity - steel 13 mm
Maximum capacity - Concrete 26 mm

ستانلي - زرادية قطع - 250 مم
(Length: 9.84 inch (25 CM
Ground heat treated cutting edges for longer life, durability and accuracy
Material: steel

بيج ريد - عفريته هيدروليكية 2 طن

All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. With a nylon injected handle reinforced with fiber and a rubber grip, this claw hammer guarantees comfort and safety during use. It's the right tool for everything from civil construction to small repairs.

Forged and hardened special steel head assuring great resistance to the product.
Polished and varnished head.
Nylon injected handle reinforced with fiber fixed with epoxy.
Injected grip.
Perfect balance between head and handle to increase comfort and safety.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life. - The curved claw helps with nail extraction due to the higher lever effect, compared to the straight claw hammer.

Product Description:38L Construction Dust Extractor M Class
38L Construction Dust Extractor M Class
Concrete Dust Extractor

The Black & Decker KA274EPK Power Sander delivers a powerful force and easy handling to tackle all your surface finishing jobs. Using an orbital design motion along with 310 watts of power, this 1/2 sheet sander is ideal for finishing large flat areas or for the removal of paint and varnish. Its ergonomic design and dust bag allow for comfortable handling and a clean, safe work space.

Specifications
Power - 310 W
Voltage - 230 V
Speed - Variable rpm
No Load Speed -
6000-10.000 rpm
Excentricity - 1.0
mm Orbit diameter -
2.0 mm Dust
Extraction [sanders]
- Dustbag Paper
attachment - Thumb
level clamping
system Paper Size -
115 x 280 mm Platten
size - 115 x 230 mm
Sanding actions -
Orbital Cable length
- 3 m Soft trigger -
No Soft grip - Yes
Kit Box - Yes