لم يتم العثور على ما يطابق بحثك
بلاك اند ديكر - دريل مطرقة 13 مم - 650 واط
Product Dimensions: 9.4 x 31.8 x 30.4 cm; 880 gShipping Weight: 6.6 KgPower: 650w13 mm chuckVariable speed and reverse switchLock on switch for continuous use
بلاك اند ديكر - مكنسة سيارة 12 فولت (5035048142301)
الميزات والفوائد- مغزل محرك سداسي 1/4 بوصة يناسب معظم أنواع تشاك- مطروقة ومزورة لحياة طويلة ومتانة- تجويف مغناطيسي يحمل 1/4 "لقم إدخال بشكل آمن- آلة دقيقة لملاءمة مثالية
FEATURES & BENEFITS- 1/4" hex drive spindle will fit most chuck types- Forged and ground for long life and durability- Magnetic recess holds 1/4" insert bits securely in use- Precision machined for perfect fit
Black & Decker KD750KC Pneumatic Hammer Drill with 2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite. It has 750W Powerful unit for serious drilling. Its Variable speed offers more control and versatility. Its come up with second hand at front side for additional control. Remember, this unit will not work in the USA because it runs on 220/240 Voltage. That means you can only use it overseas. It cannot be used in the USA. It is designed to run on Foreign 220/240 Voltage. It makes a great gift for any handyman (or handy-woman) overseas.
2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite 750W power - Powerful unit for serious drilling Powerful Pneumatic Hammer 0-5200 impacts Per minute. High performance, non slip SDS-Plus chuck for quick accessory changing Variable speed offers more control and versatility Depth guide to assist the user when a predetermined depth is needed. Secondary handle to provide additional control Specifications:
Power - 750 W Power supply - 220 Volt Voltage - 230 V Hammer - Yes Max. capacity(wood) - 30 mm Max. capacity(steel) - 13 mm Max capacity(concrete) - 26 mm Reverse - Yes Speed - Variable No load speed - 0-1050 rpm Cable length - 3 m Adjustable depth stop - Yes Adjustable second handle - Yes Lock-on switch - Yes Maximum efficiency in concrete thanks to its 2.7 joules Drilling in concrete and other materials through the chuck adapter 3 functions for the perforation, the simple drilling and chiseling Strike rate very elevated over 6000 rounds per minute for fast work Variable speed available Adjustable depth stop Designed for fast, efficient penetration of brick, block, stone and concrete Adjustable second handle Maximum capacity - wood 30 mm Maximum capacity - steel 13 mm Maximum capacity - Concrete 26 mm
Black & Decker KD985KA
وصف المنتج:
Black & Decker KD990KAوصف المنتج : 850W power - Powerful unit for serious drilling High performance, non slip SDS-Plus chuck for quick accessory changing Powerful Pneumatic Hammer 0-5180 impacts Per minute 2.4 Joule of impact energy allows the user to drill into hard materials such as concrete and granite Variable speed offers more control and versatility Secondary handle to provide additional control
Black & Decker KR753K
وصف المنتج :
750W AC motor design delivers increased levels of power and torque 13mm metal single sleeve keyless chuck Auto spindle lock Lock on button Adjustable variable speed
Black & Decker A7063وصف المنتج : 76 Piece Tool Accessories Roll Bag Set of 76 - Perfect for screwing and fixing work with easy and convenient access to accessories. Space-saving storage in the roll-up tool bag with carrying strap, socket wrench, bits. 76 pieces Roll Bag Set - Ideal for mechanic's work.
Product Specs
PRODUCT TYPE Screwdriver POWER RATING 3.6 V BATTERY TYPE Lithium-Ion MAX TORQUE 5.5 Nm NO LOAD SPEED 180 rpm BATTERY CAPACITY 1.5 Ah REVERSE No CHARGE TIME 10 h KIT BOX No ACCESSORIES SUPPLIED No SOFT GRIP No
USES General DIY tasks around the home Flat pack furniture assembly Putting up shelves, door brackets, hinges Screwdriving In tight spaces
INCLUDES 3.6V Lithium Ion Screwdriver 150mA Charger 2 x 25mm Slot screwdriver bits (4,6) 2 x 25mm PZ screwdriver bits 4 x 25mm Hex screwdriver bits 2 x PH Screwdriver bits 2 x Star Screwdriver bits
الوصفSingle-phase AC welding units, on wheels, with cooling fan. Stepless control of the welding current. Thermostatic overload protection.
المواصفات التقنية
Input voltage (1ph) 230/400V - 50/60HzPower 60% 4,4 KVANo load output voltage 48 VAmp. min-max 35 ÷ 190 A±10%Amp. 60974-1 -? E 1,6 ÷ 4 mmInsulation HProtec. Degree IP21SMachine (LxWxH) 670x340x585 mmPackage (LxWxH) 485x285x325 mmWeight box/net 24 / 22,9 KgCode 99200085
Input voltage (1ph) 230/400V - 50/60HzPower 60% 4,6 KVANo load output voltage 50 VAmp. min-max 45 ÷ 2550 A±10%Amp. 60974-1 -E 1,6 ÷ 4 mmInsulation HProtec. Degree IP21Machine (LxWxH) 670x340x585 mmPackage (LxWxH)540x280x370 mmWeight box/net 24 / 23 Kg
DeWalt DC300M2 Circular SawThe DeWalt DC300M2 Circular Saw is an efficient cordless solution for trimming wood panels and chip boards in the roof and floating floor construction. It has a powerful fan cooled motor with replaceable brushes, that delivers up to 4000 rotations per minute for fast cutting action. The 184mm, 24 tooth carbide tipped blade allows for efficient run-time and a fast, smooth cut finish at maximum 62mm depth of cut.
The extremely durable design offers a cast magnesium shoe and full metal guarding to withstand rough job site conditions. With a 0-50° bevel capacity with lever-action detents at 22.5° and 45° it can provide aggressive bevel cuts while allowing users to locate common angles quickly.
Has a keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility. The handle is set at 15° with diamond patterned grip area for better control and additional comfort. The spindle lock allows for quick and easy blade changing. It features a Lock off switch and electronic motor brake for additional control and work safety. All-metal keyless blade change system allows for quick and easy blade changes.
DeWalt 36V 4.0Ah Li-Ion Battery Technology offers extended runtime and optimised power to complete the most demanding applications quickly.
Supplied with 2 x 36 Volt 4.0Ah Li-ion batteries, kit box, 36 Volt charger.
Specifications
No Load Speed: 0-4,000/min. Blade Diameter: 184 x 20mm bore. Depth of Cut: @90?: 62mm and @45?: 41mm. Bevel Capacity:50°. Length/Height: 406/255mm. Weight: 4.7kg.
Features:Powerful DeWalt fan cooled motor with replaceable brushes and variable speed delivers fast cutting action up to 2,700 strokes per minute Quick and easy patented keyless blade change system accepts t-shank blades Tool free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions 3-position orbital action controls the aggressiveness or smoothness of cuts Patented anti-vibration counter-balance mechanism and rubber grip provide smooth operation Dust blower keeps line of cut clear of chips Lock-off switch for added user safety Modular component design for trouble free servicing Rubber coated grip to reduce surface vibration and user fatigue 36 Volt high performance battery pack provides long run-time & battery life
13 x brad point wood bits (2 x 3, 3.5, 4, 4.5, 2 x 5, 5.5, 6, 6.5, 7, 7.5 and 8mm),12 x metal drill bits (1.5, 2, 2.5, 2 x 3, 3.5, 4, 4.5, 5, 5.5, 6 and 6.5mm), 3 x masonry drill bits (6, 7 and 8mm), 2 x holesaw bits (32 and 44mm), 1 x mandrel bit, 7 x nut drivers (5, 6, 8, 10, 11, 12 and 13mm) 1 x countersink 1 x magnetic screwdriver bit holder, 11 x 50mm screwdriver bits ((PH#1, 2 x PH#2 and PH#3), (PZ#1, 2 x PZ#2 and PZ#3) and (slotted 5, 6 and 7.2mm)), 49 x 25mm screwdriver bits ((2 x PH#1, PH#2 x PH#2, and 2 x PH#3), (slotted 4, 5 and 7.2mm), (PZ#1, 2 x PZ#2 and 2 x PZ#3), (hex 4, 5, 6 and 7) and (T15, T20, T25, T30 and T40)) Tough plastic storage case
The Tramontina PRO sockets are produced with the Hyper Drive system that improves the coupling of sockets on screws and nuts, reducing the stress generated during socket usage, as well extending the socket's life. Choose the proper size and type according to your needs and let's start working.
Forged and hardened chrome vanadium steel. Chrome plated finishing. Hyper Drive profile socket (round corners). DIN 3124. Plastic hanger. The development of the new "Hyper Drive" System has meant huge advances in the utilization and efficiency of our sockets. This new system reduces the tension created on tightening, thus extending the life of the nuts, bolts and sockets. The sockets, are subjected to rigorous torque and hardness tests to ensure they meet the standard DIN 1711-1. Loosening and tightening hexagonal bolts and nuts. Tools are produced and tested according to specific standards.
Suitable for riveting, forming, and straightening metal in addition to striking chisels, center punches, pin punches, and so on, the Tramontina PRO machinist's hammer has a wood handle fixed with a steel wedge at the head which ensures safety during use. All the quality and safety that you need when hammering.
Forged special steel head. Hardening on the striking face and pein. Polished and varnished base and pein. Head with electrostatic paint finishing. Fixed with steel wedge. Varnished hardwood handle. DIN 1041. The hammers are assembled in hydraulic press and the head is attached to the handle using a metal wedge. The strenght of this assembly is tested using a pull apart test. The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product. In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed. Striking punches and pins, and to rivet, form or straighten non-hardened materials. Tools are produced and tested according to specific standards.
The mini hacksaw is an important tool to have at home. It can be used to cut steel and non-ferrous materials such as aluminum, cooper, plastic, wood, acrylic, etc. Complete your toolbox with the mini Tramontina hacksaw.
10" blade. Ergonomic injected handle. The tools are subjected to apllication tests to ensure their mechanical resistante during constant use. A varnish layer or painting protection is applied on the tools blades, in order to guarantee a longer lifetime. Tools are produced and tested according to specific standards.
Whether in industrial or automotive maintenance, tightening and loosening screws becomes easier with the help of the Tramontina PRO Easygrip screwdriver. Its hexagonal handle provides comfort and firmness during use. The screwdrivers are available with slotted, cross recessed, trafix, trafix PZ, and nut tips in traditional and stubby models in addition to a model with insulation on the blade. Choose the right sizefor you and let's start working.
Carbon steel blade. Chrome vanadium steel socket. Chrome plated finishing. Phosphated tip. Handle injected in green PVC. DIN 3125. The screwdriver blades are tested using a specific test machine, to ensure the perfect balance between mechanical resistance and hardness. The tips dimensions are verified with calibrated and certified pattern, and microscopic inspection of the phosphate quality. Tightening or loosening nuts and bolts in mechanical and electrical assemblies. Suitable for areas with limited access. Tools are produced and tested according to specific standards.
With 7 teeth per inch and a hardened and polished high carbon steel blade, the Tramontina Master professional saw provides greater accuracy on wood cutting and safety for the worker. The product has an ergonomic and varnished wood handle. The right tool for everything from civil construction to small repairs.
Hardened and polished high carbon steel blade. Ergonomic and varnished hardwood handle. Set teeth. 7 teeth per inch. Plastic protection for the cutting area. The tools are subjected to apllication tests to ensure their mechanical resistance during constant use. A varnish layer or painting protection is applied on the tools blades, in order to guarantee a longer lifetime. Tools are produced and tested according to specific standards.
Forged chrome vanadium steel.Full hardening at the body. Polished head and joint. Induction hardening at the cutting edge. Used to cut, fasten and bend cables and wires. Used by telephone engineers. Tools are produced and tested according to specific standards.
Strength, lightness, and practicality are the main features of the Tramontina PRO aviation snips, all which ensure easier and more accurate cutting. It's a tool for PROs!
Forged chrome molybdnenum steel blades. Carbon steel handle. Induction hardening at the cutting edge. Satin chrome plated finishing. Handles with special coating. Safety key bolt. Straight cut. ASME B107.16. Tools are subjected to a cutting test to ensure an accurate cutting action and are hard wearing. The hardness at the cutting edge is different to ensure the best performance of the tool. Used to cut blades up to 1,2 mm thick and stainless steelblades up to 0,7 mm thick. Tools are produced and tested according to specific standards.
All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. With a steel tubular handle and rubber grip, this claw hammer guarantees comfort and safety during use. It's the right tool for everything from civil construction to small repairs.
Octogonal neck. Forged and hardened special steel head assuring great resistance to the product. Tubular steel handle with 330 mm - 13" Perfect balance between head and handle to increase comfort and safety. The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life.
All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. With a nylon injected handle reinforced with fiber and a rubber grip, this claw hammer guarantees comfort and safety during use. It's the right tool for everything from civil construction to small repairs.
Forged and hardened special steel head assuring great resistance to the product. Polished and varnished head. Nylon injected handle reinforced with fiber fixed with epoxy. Injected grip. Perfect balance between head and handle to increase comfort and safety. The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life. - The curved claw helps with nail extraction due to the higher lever effect, compared to the straight claw hammer.
Assembling structures is much faster with the Tramontina PRO hand riveter. It?s the right tool for you that provides strength and quality.
Injected aluminum body. Forged and hardened chrome vanadium steel handle. Steel spindle and tips. Black powder coating. Handle with injected grips. Tips for 4 different rivet standards: 2.4, 3.2, 4 and 4.8 mm. Key to change the tips. Suitable tool for fast assemblies using rivets. Capacity: Aluminum rivets: 2.4, 3.2 4 and 4.8 mm Steel and stainless steel rivets: 2.4, 3.2 and 4 mm. Tools are produced and tested according to specific standards.
DynaGrip® 3 Piece Plier SetFeatures: Cutting jaws machined to a close fit for efficient cutting All exposed steel parts polished for protection against corrosion Induction hardened and tempered for long life performance Bi-material handles for comfort and grip Forged carbon steel jaws and handles Accurately machined and fitted hinge for smooth functioning 3 piece set Product Specification Barcode: 3253566970431 Net Weight: 1.129kg Total Shipping Weight: 1.694kg
Features:• High impact chrome plated ABS case for long life. • Lacquer coated blade. • Precision class ll • Hook with real zero position and with three rivets. • High standout. • Better wear resistance. • Imperial & metric consecutive for easy measurement calculation. • High performance spring.
Features:• High impact chrome plated ABS case for long life.• Lacquer coated blade.• Precision class ll• Hook with real zero position and with three rivets.• High standout.• Better wear resistance.• Imperial & metric consecutive for easymeasurement calculation.• High performance spring.
Specifications:• Heavy duty aluminium frame.• 1 Level, 1 plumb vial and 1 180 degree rotating vialfor wide range of jobs.• Ideal for small installations.
Specifications:• ABS strong body. • TPR grip for comfort. • Strong steel blade barrel for long life. • Auto quick lock push button. • Included one blade. • Blade snapper included in handle for safe and easy snap off.
Specifications:• Cr-V 60 • HRC 38 – 3X longer life. • Additionally hardened cutting edges. • Cuts medium hard wire up to 3.3mm and hard wire up to 1.8mm. • Slim and long form for tying in deep. • Plastisol grips for comfort use.
Specification:• Octagonal head. • Induction hardened head, drop forged. • Hardened and tempered tubular steel shaft for strength. • Flock – filled rubber grip for comfort and durability.
Specifications:• Rubber moulded head. • Fiberglass shaft with polypropylene outer jacket. • Ergonomic comfort grip. • For use on soft surfaces such as tiles,furniture surfaces and wooden floors.