لم يتم العثور على ما يطابق بحثك
خزان الضاغط: 24 لترالأعلى. ضغط التشغيل: 8 بارإزاحة الهواء: 170 لتر / دقيقةوحدة الضخ RPM: 1310 RPMزيت التشحيمنوع وحدة المضخة: محوريالخرج المقدر: 2 حصانالتنشيط: مرحلة واحدةمستوى الضوضاء: 80 ديسيبل
Compressor tank: 24 Liter
Max. operating pressure: 8 bar Air displacement: 170 L/min Pump unit RPM: 1310 RPM Lubrication: Oil Pump unit type: Coaxial Rated output: 2 HP Activation: Single-phase noise level: 80 dBA
ساحب قرص Proto 1 "
دبابيس ستانلي ، دبابيس شديدة التحمل - نوع G ، 6 مم - 1000 قطعة
إزميل بروتو 1 بوصة
PROTO 4 "ساحبة اسطوانة
أزاميل ستانلي ، 5002 أزاميل خشبية ، 14 مم
Proto® 5/8 "إزميل بارد
10 ملفات . 2 صلبان. مفتاح واحد. جميع أنظمة القفل الشائعة. مفتاح متعدد الوظائف لتشغيل أنظمة القفل من مجالات هندسة المرافق (التدفئة والصرف الصحي ، وتكييف الهواء ، والتكنولوجيا الكهربائية) ، وإمدادات الغاز والمياه وأنظمة الإغلاق. إصدار 8 أذرع: مفتاحان عنكبوت بأربعة اتجاهات متصلان بطريقة موفرة للمساحة باستخدام المغناطيس. بت عكسي: فتحة 1،0 × 7 مم وفتحة عرضية PH2. مفتاح وقمة قابلة للانعكاس مرتبطة بسلك فولاذي مقاوم للصدأ ثابت. جودة طلاء السطح. تصميم الزنك المصبوب بالوزن الأمثل.
أزاميل ستانلي ، 5002 أزاميل خشبية ، 10 مم
بروتو 1/2 "إزميل بارد
ممغنط / مزيل مغناطيسي Proto®
Proto® Magnetizer / demagnitizer
إزميل بارد Proto® 3/4 "
إزميل بارد Proto® 3/8 "
أزاميل ستانلي ، 5002 أزاميل خشبية ، 12 مم
بلاك اند ديكر - دريل مطرقة 13 مم - 650 واط
Product Dimensions: 9.4 x 31.8 x 30.4 cm; 880 gShipping Weight: 6.6 KgPower: 650w13 mm chuckVariable speed and reverse switchLock on switch for continuous use
بروتو 6 "ساحبة اسطوانة
Proto® 5/16 "إزميل بارد
Proto® 1/4 "إزميل بارد
7/8 "إزميل بارد
طقم بروتو 194 قطعة ماستر مع صندوق علوي J442719-8RD
Specifications:• Cr-V 60 • HRC 38 – 3X longer life. • Additionally hardened cutting edges. • Cuts medium hard wire up to 3.3mm and hard wire up to 1.8mm. • Slim and long form for tying in deep. • Plastisol grips for comfort use.
إزميل بارد Proto® 1-3 / 16 "
إزميل بروتو 5/8 "Super-Duty على البارد على البارد
أزاميل ستانلي ، 5002 أزاميل خشبية ، 18 مم
مجموعة أدوات الصيانة Proto® 126 قطعة
إزميل نقطة الماس Proto® 3/16 بوصة
مجموعة أدوات الصيانة المتوسطة Proto® 179 قطعة مع خزانة الأسطوانة J442735-7RD
مجموعة بروتو 558 قطعة متري ماستر مع محطة عمل J444142-6RD
أزاميل ستانلي ، 5002 أزاميل خشبية ، 8 مم
إزميل شديد التحمل على البارد Proto® 3/8 "
أزاميل ستانلي ، 5002 أزاميل خشبية ، 20 مم
1046 قطعة مجموعة الصيانة الفنية الرئيسية
Forged chrome vanadium steel.Full hardening at the body. Polished head and joint. Induction hardening at the cutting edge. Used to cut, fasten and bend cables and wires. Used by telephone engineers. Tools are produced and tested according to specific standards.
بروتو 2 بوصة - ساحب القرص
PROTO 2-inch Disc Puller
مجموعة أدوات الصيانة المتوسطة Proto® 179 قطعة مع خزانة الأسطوانة J442742-7RD
بروتو - حلقة خارجية للقمة مفتاح الربط من الصلب 2 بوصة
إزميل بروتو 3/4 بوصة فائق التحمل على البارد
طقم إضافات بروتو ١١١ قطعة متري مع صندوق علوي J442710-4RD-IC
مجموعة أدوات بروتو 272 قطعة ماستر
أزاميل ستانلي ، أزاميل DynaGrip الخشبية ، 25 مم
أزاميل ستانلي ، 5002 أزاميل خشبية ، 50 مم
إزميل بروتو 1/2 "Super-Duty على البارد على البارد
ستانلي - جهاز قياس مسافة يعمل بالليزر , 30 متر
إزميل بروتو للخدمة الشاقة 1 بوصة
مجموعة Proto® 1/4 "Drive Sub (92 قطعة)
حامل المثقاب والإزميل
Proto® Punch & Chisel Holder
مسنن THREADER ، 65RTC NPT
خراطيش الأنابيب RIDGID® - مقاومة للانحشار RCHT THRDRS NPT
مشغل براغي Proto® Phillips® - 2-3 / 4 "
بروتو - تحويلة من 1 بوصة الى 1.5 بوصة
إزميل بروتو 7/8 "Super-Duty على البارد على البارد
Black & Decker KD990KAوصف المنتج : 850W power - Powerful unit for serious drilling High performance, non slip SDS-Plus chuck for quick accessory changing Powerful Pneumatic Hammer 0-5180 impacts Per minute 2.4 Joule of impact energy allows the user to drill into hard materials such as concrete and granite Variable speed offers more control and versatility Secondary handle to provide additional control
مجموعة أدوات الصيانة المتوسطة Proto® 179 قطعة
بروتو - تحويلة متحركة 360 درجة 1/4 بوصة
أزاميل ستانلي ، 5002 أزاميل خشبية ، 16 مم
Proto® CHISEL DIA POINT 1/4
بروتو - حبة مغناطيسية مقاس 9/16 بوصة
الوصفSingle-phase AC welding units, on wheels, with cooling fan. Stepless control of the welding current. Thermostatic overload protection.
المواصفات التقنية
Input voltage (1ph) 230/400V - 50/60HzPower 60% 4,6 KVANo load output voltage 50 VAmp. min-max 45 ÷ 2550 A±10%Amp. 60974-1 -E 1,6 ÷ 4 mmInsulation HProtec. Degree IP21Machine (LxWxH) 670x340x585 mmPackage (LxWxH)540x280x370 mmWeight box/net 24 / 23 Kg
Input voltage (1ph) 230/400V - 50/60HzPower 60% 4,4 KVANo load output voltage 48 VAmp. min-max 35 ÷ 190 A±10%Amp. 60974-1 -? E 1,6 ÷ 4 mmInsulation HProtec. Degree IP21SMachine (LxWxH) 670x340x585 mmPackage (LxWxH) 485x285x325 mmWeight box/net 24 / 22,9 KgCode 99200085
Suitable for riveting, forming, and straightening metal in addition to striking chisels, center punches, pin punches, and so on, the Tramontina PRO machinist's hammer has a wood handle fixed with a steel wedge at the head which ensures safety during use. All the quality and safety that you need when hammering.
Forged special steel head. Hardening on the striking face and pein. Polished and varnished base and pein. Head with electrostatic paint finishing. Fixed with steel wedge. Varnished hardwood handle. DIN 1041. The hammers are assembled in hydraulic press and the head is attached to the handle using a metal wedge. The strenght of this assembly is tested using a pull apart test. The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product. In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed. Striking punches and pins, and to rivet, form or straighten non-hardened materials. Tools are produced and tested according to specific standards.
أزاميل ستانلي ، 5002 أزاميل خشبية ، 22 مم
تم تصميم RIDGID 36957315M Plumbing Bender ، المصمم من أجل الانحناء السهل والدقيق ، بما يصل إلى 180 درجة من الانحناءات في الأنابيب النحاسية الناعمة K و L. يتميز بندر الأنبوب النحاسي هذا بمقابض قبضة وسادة تعويض لتحسين الراحة عند تشكيل الانحناءات بزاوية 180 درجة. تتميز بزاوية بدء 90 درجة وحذاء بلاستيكي مصمم خصيصًا. تعمل هاتان الميزتان معًا على تسهيل الجهد المطلوب لتشكيل انحناءات سلسة ودقيقة.لمزيد من الراحة ، يوفر الثني علامات مرجعية يدوية تشير إلى زاوية الانحناءات السريعة. تتميز آلة ثني الرافعة هذه بأنبوب بحجم 15 مم بقطر خارجي وقطر 56 مم. يزن جهاز ثني الأنابيب النحاسية 2.8 كيلوجرام (6.5 رطل) ، وتغطي شركة RIDGID منتجاتها بضمان مدى الحياة ضد عيوب المواد أو التصنيع طوال عمر الأداة. . تم تصميم كل أداة تحمل العلامة التجارية RIDGID وفقًا لنفس المعايير العالية للجودة والقوة والتحمل ، كما كان أول مفتاح ربط للأنابيب للخدمة الشاقة منذ أكثر من 80 عامًا.
ساحب التروس Proto® 2 Jaw ، 10 بوصات
القاطع ، PC-1375
RIDGID® PLASTIC PIPE AND TUBING CUTTER PC-1375
ريدجيد - رنش - إند بايب 10 بوصة
أداة احتراق الأنابيب Proto®
بروتو - حلقة ربط مفتاح 1 بوصة مقاس 2-3/4 بوصة محفورة
أداة Proto® متعددة الأغراض - بلانت الأنف
بروتو - حبة مغناطيسية مقاس 5/8 بوصة
Black & Decker KD750KC Pneumatic Hammer Drill with 2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite. It has 750W Powerful unit for serious drilling. Its Variable speed offers more control and versatility. Its come up with second hand at front side for additional control. Remember, this unit will not work in the USA because it runs on 220/240 Voltage. That means you can only use it overseas. It cannot be used in the USA. It is designed to run on Foreign 220/240 Voltage. It makes a great gift for any handyman (or handy-woman) overseas.
2.7 Joule of impact energy allows the user to drill into hard materials such as concrete and granite 750W power - Powerful unit for serious drilling Powerful Pneumatic Hammer 0-5200 impacts Per minute. High performance, non slip SDS-Plus chuck for quick accessory changing Variable speed offers more control and versatility Depth guide to assist the user when a predetermined depth is needed. Secondary handle to provide additional control Specifications:
Power - 750 W Power supply - 220 Volt Voltage - 230 V Hammer - Yes Max. capacity(wood) - 30 mm Max. capacity(steel) - 13 mm Max capacity(concrete) - 26 mm Reverse - Yes Speed - Variable No load speed - 0-1050 rpm Cable length - 3 m Adjustable depth stop - Yes Adjustable second handle - Yes Lock-on switch - Yes Maximum efficiency in concrete thanks to its 2.7 joules Drilling in concrete and other materials through the chuck adapter 3 functions for the perforation, the simple drilling and chiseling Strike rate very elevated over 6000 rounds per minute for fast work Variable speed available Adjustable depth stop Designed for fast, efficient penetration of brick, block, stone and concrete Adjustable second handle Maximum capacity - wood 30 mm Maximum capacity - steel 13 mm Maximum capacity - Concrete 26 mm