العدد والأدوات

Item model number MT350K-QS
Power Source Corded Electric
Voltage 230 Volts
Wattage 300 watts
Item Package Quantity 1
Number Of Pieces 1

Weight & dimensions
Cable length 3 m
Item Weight 2.54 kg

Performance
Idle speed (max) 700 RPM

Power
Input power 300 W
AC input voltage 230 V
Power source AC

المواصفاتConverts the vehicle 12 Volt battery power into 220 Volt household power, gives access to mains power while away from the home Integral AC adapter - plug electrical appliances directly into the integral AC socket - no need for multiple charging accessories Power and recharge electronic appliances whilst away from the home, by using the power inverter to convert vehicle battery power (12 Volt) into general household power (220 Volt) Battery clips included - attach directly to the vehicle battery / or directly to a portable 12 Volt Leisure battery

Drilling Capacity: Wood: 25 mm, Concrete: 16 mm, Steel: 13 mm750 Watts Continuous Rating Input & 2800 RPM
Trigger sensitive variable speed switch allows a user to drill slowly for precision accuracy when starting to drill a hole
Rubber back handle increase comfort to the user in drilling and hammer drilling applications

المواصفات

1 1/4" to 4" (32-100 mm) Drain Lines

Simple adjustment knob allows unit to spin both 7/8” (22 mm) and 5/8” (16 mm) diameter cable. Adjusts in seconds.

• 7/8” (22 mm) cable (C-10) cleans 2” to 4” (50 mm to 100 mm) lines through 150’ 45.7 m).
• 5/8” (16 mm) cable (C-7, C-8, C-9) cleans 1 ¼” to 4” (32 mm to 100 mm) lines through 125’ (38.1 m).

A compact machine for institutional, commercial or residential cleaning. Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.
Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.
Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
Equipped with 1/2 HP motor. CSA approved. Approved to UL standards (NRTLC).

الوصفSingle-phase AC welding units, on wheels, with cooling fan. Stepless control of the welding current. Thermostatic overload protection.

المواصفات التقنية

Input voltage (1ph) 230/400V - 50/60Hz
Power 60% 4,4 KVA
No load output voltage 48 V
Amp. min-max 35 ÷ 190 A±10%
Amp. 60974-1 -
? E 1,6 ÷ 4 mm
Insulation H
Protec. Degree IP21S
Machine (LxWxH) 670x340x585 mm
Package (LxWxH) 485x285x325 mm
Weight box/net 24 / 22,9 Kg
Code 99200085

الوصفSingle-phase AC welding units, on wheels, with cooling fan. Stepless control of the welding current. Thermostatic overload protection.

المواصفات التقنية

Input voltage (1ph) 230/400V - 50/60Hz
Power 60% 4,6 KVA
No load output voltage 50 V
Amp. min-max 45 ÷ 2550 A±10%
Amp. 60974-1 -
E 1,6 ÷ 4 mm
Insulation H
Protec. Degree IP21
Machine (LxWxH) 670x340x585 mm
Package (LxWxH)540x280x370 mm
Weight box/net 24 / 23 Kg

Features:
- Random orbit action for faster wax application and finishing quality
- Front and end handle position for greater control
- Rubber grip provides comfort and prevent slipping,Dust aseal rubber
- On/off switch for longer tool life
- 3 meter cable for optimum convince
- Foam applicator for applying wax/polish
- Polishing bonnets for a high quality finish.

Details:
Model: KP600
Power Input: 60W
Power Voltage: 220-240V
Frequency: 50/60Hz
No Load speed: 4400/min
Sanding Plate Diameter: ?152
Weight: 1.4KG
Cable: 3M

Features + Benefits
V-groove for shaping edges
0.2mm depth of cut setting for more flexibility and accuracy in planing operations
82mm width of cut for quick working
Reversible carbide tipped blades for long life and a better surface finish
2mm depth of cut removes more material in a single pass for fast results
Combined guidance and cutting depth adjustment handle
Dust extraction adapter for a cleaner working environment
Powerful 650W motor for outstanding performance

Product Specs
PRODUCT TYPE: Planer
POWER SOURCE: Corded
POWER RATING: 650.0 W
PLUG VOLTAGE: 230 V
NO LOAD SPEED: 17,000 rpm
WIDTH OF CUT: 82 mm
DEPTH OF CUT: 0 - 2.0 mm
REBATING DEPTH: 8 mm
VARIABLE SPEED: No
REVERSIBLE BLADES: Yes
CUTTER TYPE: TCT
CABLE LENGTH: 3 m
SOFT GRIP: No
ACCESSORIES SUPPLIED: Yes
DUST EXTRACTION: Dust Bag
ERGONOMIC HANDLE: Yes
PARK POSITION: No
VACUUM ADAPTOR: Yes
SOUND PRESSURE: 89.1 dB(A)
SOUND POWER: 102.1 dB(A)
VIBRATION: <2.5 m/s²

Features + Benefits
3 collets provided to suit all shank sizes below 12mm
Flat motor housing enables upside down, easier bit changes
Spindle lock for easy cutter change
Lock off trigger for enhanced safety
Variable speed gives the user more control to prevent burning of the material being shaped
1200W motor for long life and powerful performance
Large side handles give a sure grip for improved safety and control

Product Specs :
PRODUCT TYPE: Router
POWER SOURCE: Corded
POWER RATING: 1200.0 W
PLUG VOLTAGE: 230 V
NO LOAD SPEED: 8,000 - 27,000 rpm
PLUNGE DEPTH: 55 mm
COLLET SIZE: 6, 6.35, 8 mm
MAXIMUM CUTTER DIAMETER: 30 mm
DEPTH OF CUT: 55 mm
DUST EXTRACTION: Yes
VARIABLE SPEED: Yes
CABLE LENGTH: 3 m
SOFT GRIP: No
ACCESSORIES SUPPLIED: Yes
SOUND PRESSURE: 95 dB(A)
SOUND POWER: 106 dB(A)
VIBRATION: 5.77 m/s²
ERGONOMIC HANDLE: Yes
VACUUM ADAPTOR: Yes
SPINDLE LOCK: Yes

DeWalt DC300M2 Circular Saw
The DeWalt DC300M2 Circular Saw is an efficient cordless solution for trimming wood panels and chip boards in the roof and floating floor construction. It has a powerful fan cooled motor with replaceable brushes, that delivers up to 4000 rotations per minute for fast cutting action. The 184mm, 24 tooth carbide tipped blade allows for efficient run-time and a fast, smooth cut finish at maximum 62mm depth of cut.

The extremely durable design offers a cast magnesium shoe and full metal guarding to withstand rough job site conditions. With a 0-50° bevel capacity with lever-action detents at 22.5° and 45° it can provide aggressive bevel cuts while allowing users to locate common angles quickly.

Has a keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility. The handle is set at 15° with diamond patterned grip area for better control and additional comfort. The spindle lock allows for quick and easy blade changing. It features a Lock off switch and electronic motor brake for additional control and work safety. All-metal keyless blade change system allows for quick and easy blade changes.

DeWalt 36V 4.0Ah Li-Ion Battery Technology offers extended runtime and optimised power to complete the most demanding applications quickly.

Supplied with 2 x 36 Volt 4.0Ah Li-ion batteries, kit box, 36 Volt charger.

Specifications

No Load Speed: 0-4,000/min.
Blade Diameter: 184 x 20mm bore.
Depth of Cut: @90?: 62mm and @45?: 41mm.
Bevel Capacity:50°.
Length/Height: 406/255mm.
Weight: 4.7kg.

Features:
Powerful DeWalt fan cooled motor with replaceable brushes and variable speed delivers fast cutting action up to 2,700 strokes per minute
Quick and easy patented keyless blade change system accepts t-shank blades
Tool free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions
3-position orbital action controls the aggressiveness or smoothness of cuts
Patented anti-vibration counter-balance mechanism and rubber grip provide smooth operation
Dust blower keeps line of cut clear of chips
Lock-off switch for added user safety
Modular component design for trouble free servicing
Rubber coated grip to reduce surface vibration and user fatigue
36 Volt high performance battery pack provides long run-time & battery life

13 x brad point wood bits (2 x 3, 3.5, 4, 4.5, 2 x 5, 5.5, 6, 6.5, 7, 7.5 and 8mm),
12 x metal drill bits (1.5, 2, 2.5, 2 x 3, 3.5, 4, 4.5, 5, 5.5, 6 and 6.5mm),
3 x masonry drill bits (6, 7 and 8mm),
2 x holesaw bits (32 and 44mm),
1 x mandrel bit,
7 x nut drivers (5, 6, 8, 10, 11, 12 and 13mm)
1 x countersink
1 x magnetic screwdriver bit holder,
11 x 50mm screwdriver bits ((PH#1, 2 x PH#2 and PH#3), (PZ#1, 2 x PZ#2 and PZ#3) and (slotted 5, 6 and 7.2mm)),
49 x 25mm screwdriver bits ((2 x PH#1, PH#2 x PH#2, and 2 x PH#3), (slotted 4, 5 and 7.2mm), (PZ#1, 2 x PZ#2 and 2 x PZ#3), (hex 4, 5, 6 and 7) and (T15, T20, T25, T30 and T40))
Tough plastic storage case

The Tramontina PRO sockets are produced with the Hyper Drive system that improves the coupling of sockets on screws and nuts, reducing the stress generated during socket usage, as well extending the socket's life. Choose the proper size and type according to your needs and let's start working.

Forged and hardened chrome vanadium steel.
Chrome plated finishing.
Hyper Drive profile socket (round corners).
DIN 3124.
Plastic hanger.
The development of the new "Hyper Drive" System has meant huge advances in the utilization and efficiency of our sockets. This new system reduces the tension created on tightening, thus extending the life of the nuts, bolts and sockets.
The sockets, are subjected to rigorous torque and hardness tests to ensure they meet the standard DIN 1711-1.
Loosening and tightening hexagonal bolts and nuts.
Tools are produced and tested according to specific standards.

The Tramontina PRO sockets are produced with the Hyper Drive system that improves the coupling of sockets on screws and nuts, reducing the stress generated during socket usage, as well extending the socket's life. Choose the proper size and type according to your needs and let's start working.

Suitable for riveting, forming, and straightening metal in addition to striking chisels, center punches, pin punches, and so on, the Tramontina PRO machinist's hammer has a wood handle fixed with a steel wedge at the head which ensures safety during use. All the quality and safety that you need when hammering.

Forged special steel head.
Hardening on the striking face and pein.
Polished and varnished base and pein.
Head with electrostatic paint finishing.
Fixed with steel wedge.
Varnished hardwood handle.
DIN 1041.
The hammers are assembled in hydraulic press and the head is attached to the handle using a metal wedge. The strenght of this assembly is tested using a pull apart test.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product.
In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed.
Striking punches and pins, and to rivet, form or straighten non-hardened materials.
Tools are produced and tested according to specific standards.

The mini hacksaw is an important tool to have at home. It can be used to cut steel and non-ferrous materials such as aluminum, cooper, plastic, wood, acrylic, etc. Complete your toolbox with the mini Tramontina hacksaw.

10" blade.
Ergonomic injected handle.
The tools are subjected to apllication tests to ensure their mechanical resistante during constant use.
A varnish layer or painting protection is applied on the tools blades, in order to guarantee a longer lifetime.
Tools are produced and tested according to specific standards.

Whether in industrial or automotive maintenance, tightening and loosening screws becomes easier with the help of the Tramontina PRO Easygrip screwdriver. Its hexagonal handle provides comfort and firmness during use. The screwdrivers are available with slotted, cross recessed, trafix, trafix PZ, and nut tips in traditional and stubby models in addition to a model with insulation on the blade. Choose the right size
for you and let's start working.

Carbon steel blade.
Chrome vanadium steel socket.
Chrome plated finishing.
Phosphated tip.
Handle injected in green PVC.
DIN 3125.
The screwdriver blades are tested using a specific test machine, to ensure the perfect balance between mechanical resistance and hardness.
The tips dimensions are verified with calibrated and certified pattern, and microscopic inspection of the phosphate quality.
Tightening or loosening nuts and bolts in mechanical and electrical assemblies.
Suitable for areas with limited access.
Tools are produced and tested according to specific standards.

With 7 teeth per inch and a hardened and polished high carbon steel blade, the Tramontina Master professional saw provides greater accuracy on wood cutting and safety for the worker. The product has an ergonomic and varnished wood handle. The right tool for everything from civil construction to small repairs.

Hardened and polished high carbon steel blade.
Ergonomic and varnished hardwood handle.
Set teeth.
7 teeth per inch.
Plastic protection for the cutting area.
The tools are subjected to apllication tests to ensure their mechanical resistance during constant use.
A varnish layer or painting protection is applied on the tools blades, in order to guarantee a longer lifetime.
Tools are produced and tested according to specific standards.

Forged chrome vanadium steel.
Full hardening at the body.
Polished head and joint.
Induction hardening at the cutting edge.
Used to cut, fasten and bend cables and wires.
Used by telephone engineers.
Tools are produced and tested according to specific standards.

Strength, lightness, and practicality are the main features of the Tramontina PRO aviation snips, all which ensure easier and more accurate cutting. It's a tool for PROs!

Forged chrome molybdnenum steel blades.
Carbon steel handle.
Induction hardening at the cutting edge.
Satin chrome plated finishing.
Handles with special coating.
Safety key bolt.
Straight cut.
ASME B107.16.
Tools are subjected to a cutting test to ensure an accurate cutting action and are hard wearing.
The hardness at the cutting edge is different to ensure the best performance of the tool.
Used to cut blades up to 1,2 mm thick and stainless steelblades up to 0,7 mm thick.
Tools are produced and tested according to specific standards.

All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. With a steel tubular handle and rubber grip, this claw hammer guarantees comfort and safety during use. It's the right tool for everything from civil construction to small repairs.

Octogonal neck.
Forged and hardened special steel head assuring great resistance to the product.
Tubular steel handle with 330 mm - 13"
Perfect balance between head and handle to increase comfort and safety.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life.

All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. With a nylon injected handle reinforced with fiber and a rubber grip, this claw hammer guarantees comfort and safety during use. It's the right tool for everything from civil construction to small repairs.

Forged and hardened special steel head assuring great resistance to the product.
Polished and varnished head.
Nylon injected handle reinforced with fiber fixed with epoxy.
Injected grip.
Perfect balance between head and handle to increase comfort and safety.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life. - The curved claw helps with nail extraction due to the higher lever effect, compared to the straight claw hammer.

Assembling structures is much faster with the Tramontina PRO hand riveter. It?s the right tool for you that provides strength and quality.

Injected aluminum body.
Forged and hardened chrome vanadium steel handle.
Steel spindle and tips.
Black powder coating.
Handle with injected grips.
Tips for 4 different rivet standards: 2.4, 3.2, 4 and 4.8 mm.
Key to change the tips.
Suitable tool for fast assemblies using rivets.
Capacity:
Aluminum rivets: 2.4, 3.2 4 and 4.8 mm
Steel and stainless steel rivets: 2.4, 3.2 and 4 mm.
Tools are produced and tested according to specific standards.

DynaGrip® 3 Piece Plier Set
Features: Cutting jaws machined to a close fit for efficient cutting All exposed steel parts polished for protection against corrosion Induction hardened and tempered for long life performance Bi-material handles for comfort and grip Forged carbon steel jaws and handles Accurately machined and fitted hinge for smooth functioning 3 piece set Product Specification Barcode: 3253566970431
Net Weight: 1.129kg
Total Shipping Weight: 1.694kg

Features:
• High impact chrome plated ABS case for long life.
• Lacquer coated blade.
• Precision class ll
• Hook with real zero position and with three rivets.
• High standout.
• Better wear resistance.
• Imperial & metric consecutive for easy
measurement calculation.
• High performance spring.

Features:
• High impact chrome plated ABS case for long life.
• Lacquer coated blade.
• Precision class ll
• Hook with real zero position and with three rivets.
• High standout.
• Better wear resistance.
• Imperial & metric consecutive for easy
measurement calculation.
• High performance spring.

Features:
• High impact chrome plated ABS case for long life.
• Lacquer coated blade.
• Precision class ll
• Hook with real zero position and with three rivets.
• High standout.
• Better wear resistance.
• Imperial & metric consecutive for easy
measurement calculation.
• High performance spring.

Features:
• High impact chrome plated ABS case for long life.
• Lacquer coated blade.
• Precision class ll
• Hook with real zero position and with three rivets.
• High standout.
• Better wear resistance.
• Imperial & metric consecutive for easy
measurement calculation.
• High performance spring.

Specifications:
• Heavy duty aluminium frame.
• 1 Level, 1 plumb vial and 1 180 degree rotating vial
for wide range of jobs.
• Ideal for small installations.

Specifications:
• ABS strong body.
• TPR grip for comfort.
• Strong steel blade barrel for long life.
• Auto quick lock push button.
• Included one blade.
• Blade snapper included in handle for safe and easy snap off.